Skip to content
FIXtags

FIX MESSAGE 35=AA

DerivativeSecurityList

MsgType (35) = AASecuritiesReferenceDataAdded FIX.4.3

Definition

The Derivative Security List message is used to return a list of securities that matches the criteria specified in a Derivative Security List Request.

Message structure 452 distinct fields

Source order, including nested components and groups. Group counts precede the repeated entries. “Required here” is relative to the enclosing component or group, not unconditional in the message. A dash means not marked required; conditional requirements remain in the source notes. This is a reference, not a counterparty-specific validator.

  1. StandardHeaderComponentRequired

    MsgType = AA (2 A's)

    StandardHeader definition & usage →

    1. 8 BeginStringStringRequired here

      FIXT.1.1 (Always unencrypted, must be first field in message)

    2. 9 BodyLengthLengthRequired here

      (Always unencrypted, must be second field in message)

    3. 35 MsgTypeStringRequired here

      (Always unencrypted, must be third field in message)

    4. 1128 ApplVerIDString—

      Indicates application version using a service pack identifier. The ApplVerID applies to a specific message occurrence.

    5. 1156 ApplExtIDint—
    6. 1129 CstmApplVerIDString—

      Used to support bilaterally agreed custom functionality

    7. 49 SenderCompIDStringRequired here

      (Always unencrypted)

    8. 56 TargetCompIDStringRequired here

      (Always unencrypted)

    9. 115 OnBehalfOfCompIDString—

      Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)

    10. 128 DeliverToCompIDString—

      Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)

    11. 90 SecureDataLenDeprecated FIXT.1.1Length—

      Required to identify length of encrypted section of message. (Always unencrypted)

    12. 91 SecureDataDeprecated FIXT.1.1data—

      Required when message body is encrypted. Always immediately follows SecureDataLen field.

    13. 34 MsgSeqNumSeqNumRequired here

      (Can be embedded within encrypted data section.)

    14. 50 SenderSubIDString—

      (Can be embedded within encrypted data section.)

    15. 142 SenderLocationIDString—

      Sender's LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)

    16. 57 TargetSubIDString—

      "ADMIN" reserved for administrative messages not intended for a specific user. (Can be embedded within encrypted data section.)

    17. 143 TargetLocationIDString—

      Trading partner LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)

    18. 116 OnBehalfOfSubIDString—

      Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    19. 144 OnBehalfOfLocationIDString—

      Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    20. 129 DeliverToSubIDString—

      Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    21. 145 DeliverToLocationIDString—

      Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    22. 43 PossDupFlagBoolean—

      Always required for retransmitted messages, whether prompted by the sending system or as the result of a resend request. (Can be embedded within encrypted data section.)

    23. 97 PossResendBoolean—

      Required when message may be duplicate of another message sent under a different sequence number. (Can be embedded within encrypted data section.)

    24. 52 SendingTimeUTCTimestampRequired here

      (Can be embedded within encrypted data section.)

    25. 122 OrigSendingTimeUTCTimestamp—

      Required for message resent as a result of a ResendRequest. If data is not available set to same value as SendingTime (Can be embedded within encrypted data section.)

    26. 212 XmlDataLenLength—

      Required when specifying XmlData to identify the length of a XmlData message block. (Can be embedded within encrypted data section.)

    27. 213 XmlDatadata—

      Can contain a XML formatted message block (e.g. FIXML). Always immediately follows XmlDataLen field. (Can be embedded within encrypted data section.) See Volume 1: FIXML Support

    28. 347 MessageEncodingString—

      Type of message encoding (non-ASCII characters) used in a message's "Encoded" fields. Required if any "Encoding" fields are used.

    29. 369 LastMsgSeqNumProcessedSeqNum—

      The last MsgSeqNum value received by the FIX engine and processed by downstream application, such as trading system or order routing system. Can be specified on every message sent. Useful for detecting a backlog with a counterparty.

    30. HopGrpRepeating groupCount tag 627—

      Number of repeating groups of historical "hop" information. Only applicable if OnBehalfOfCompID is used, however, its use is optional. Note that some market regulations or counterparties may require tracking of message hops.

      HopGrp definition & usage →

      1. 627 NoHopsGroup count—
      2. 628 HopCompIDString—
      3. 629 HopSendingTimeUTCTimestamp—
      4. 630 HopRefIDSeqNum—
  2. ApplicationSequenceControlComponent—

    ApplicationSequenceControl definition & usage →

    1. 1180 ApplIDString—

      Identifies the application with which a message is associated. Used only if application sequencing is in effect.

    2. 1181 ApplSeqNumSeqNum—

      Application sequence number assigned to the message by the application generating the message. Used only if application sequencing is in effect. Conditionally required if ApplID has been specified.

    3. 1350 ApplLastSeqNumSeqNum—

      The previous sequence number in the application sequence stream. Permits an application to publish messages with sequence gaps where it cannot be avoided. Used only if application sequencing is in effect. Conditionally required if ApplID has been specified

    4. 1352 ApplResendFlagBoolean—

      Used to indicate that a message is being sent in response to an Application Message Request. Used only if application sequencing is in effect. It is possible for both ApplResendFlag and PossDupFlag to be set on the same message if the Sender's cache size is greater than zero and the message is being resent due to a session level resend request.

  3. 964 SecurityReportIDint—
  4. 320 SecurityReqIDString—
  5. 322 SecurityResponseIDString—

    Identifier for the Derivative Security List message

  6. 560 SecurityRequestResultint—

    Result of the Security Request identified by SecurityReqID

  7. 715 ClearingBusinessDateLocalMktDate—
  8. UnderlyingInstrumentComponent—

    Underlying security for which derivatives are being returned

    UnderlyingInstrument definition & usage →

    1. 311 UnderlyingSymbolString—
    2. 312 UnderlyingSymbolSfxString—
    3. 309 UnderlyingSecurityIDString—
    4. 305 UnderlyingSecurityIDSourceString—
    5. UndSecAltIDGrpRepeating groupCount tag 457—

      UndSecAltIDGrp definition & usage →

      1. 457 NoUnderlyingSecurityAltIDGroup count—
      2. 458 UnderlyingSecurityAltIDString—
      3. 459 UnderlyingSecurityAltIDSourceString—
    6. 462 UnderlyingProductint—
    7. 463 UnderlyingCFICodeString—
    8. 310 UnderlyingSecurityTypeString—
    9. 763 UnderlyingSecuritySubTypeString—
    10. 313 UnderlyingMaturityMonthYearMonthYear—
    11. 542 UnderlyingMaturityDateLocalMktDate—
    12. 1213 UnderlyingMaturityTimeTZTimeOnly—
    13. 241 UnderlyingCouponPaymentDateLocalMktDate—
    14. 1453 UnderlyingRestructuringTypeString—
    15. 1454 UnderlyingSeniorityString—
    16. 1455 UnderlyingNotionalPercentageOutstandingPercentage—
    17. 1456 UnderlyingOriginalNotionalPercentageOutstandingPercentage—
    18. 1459 UnderlyingAttachmentPointPercentage—
    19. 1460 UnderlyingDetachmentPointPercentage—
    20. 242 UnderlyingIssueDateLocalMktDate—
    21. 243 UnderlyingRepoCollateralSecurityTypeDeprecated FIX.4.4String—
    22. 244 UnderlyingRepurchaseTermDeprecated FIX.4.4int—
    23. 245 UnderlyingRepurchaseRateDeprecated FIX.4.4Percentage—
    24. 246 UnderlyingFactorfloat—
    25. 256 UnderlyingCreditRatingString—
    26. 595 UnderlyingInstrRegistryString—
    27. 592 UnderlyingCountryOfIssueCountry—
    28. 593 UnderlyingStateOrProvinceOfIssueString—
    29. 594 UnderlyingLocaleOfIssueString—
    30. 247 UnderlyingRedemptionDateDeprecated FIX.4.4LocalMktDate—
    31. 316 UnderlyingStrikePricePrice—
    32. 941 UnderlyingStrikeCurrencyCurrency—
    33. 317 UnderlyingOptAttributechar—
    34. 436 UnderlyingContractMultiplierfloat—
    35. 1437 UnderlyingContractMultiplierUnitint—
    36. 1441 UnderlyingFlowScheduleTypeint—
    37. 998 UnderlyingUnitOfMeasureString—
    38. 1423 UnderlyingUnitOfMeasureQtyQty—
    39. 1424 UnderlyingPriceUnitOfMeasureString—
    40. 1425 UnderlyingPriceUnitOfMeasureQtyQty—
    41. 1000 UnderlyingTimeUnitString—

      Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

    42. 1419 UnderlyingExerciseStyleint—
    43. 435 UnderlyingCouponRatePercentage—
    44. 308 UnderlyingSecurityExchangeExchange—
    45. 306 UnderlyingIssuerString—
    46. 362 EncodedUnderlyingIssuerLenLength—
    47. 363 EncodedUnderlyingIssuerdata—
    48. 307 UnderlyingSecurityDescString—
    49. 364 EncodedUnderlyingSecurityDescLenLength—
    50. 365 EncodedUnderlyingSecurityDescdata—
    51. 877 UnderlyingCPProgramString—
    52. 878 UnderlyingCPRegTypeString—
    53. 972 UnderlyingAllocationPercentPercentage—

      Specific to the < UnderlyingInstrument > Percent of the Strike Price that this underlying represents. Necessary for derivatives that deliver into more than one underlying instrument.

    54. 318 UnderlyingCurrencyCurrency—

      Specific to the <UnderlyingInstrument> (not in <Instrument>)

    55. 879 UnderlyingQtyQty—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) Unit amount of the underlying security (par, shares, currency, etc.)

    56. 975 UnderlyingSettlementTypeint—

      Specific to the < UnderlyingInstrument > Indicates order settlement period for the underlying deliverable component.

    57. 973 UnderlyingCashAmountAmt—

      Specific to the < UnderlyingInstrument > Cash amount associated with the underlying component. Necessary for derivatives that deliver into more than one underlying instrument and one of the underlying's is a fixed cash value.

    58. 974 UnderlyingCashTypeString—

      Specific to the < UnderlyingInstrument > Used for derivatives that deliver into cash underlying. Indicates that the cash is either fixed or difference value (difference between strike and current underlying price)

    59. 810 UnderlyingPxPrice—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal clean price (percent-of-par or per unit) of the underlying security or basket.

    60. 882 UnderlyingDirtyPricePrice—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket. "Dirty" means it includes accrued interest

    61. 883 UnderlyingEndPricePrice—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket at the end of the agreement.

    62. 884 UnderlyingStartValueAmt—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the start of the agreement

    63. 885 UnderlyingCurrentValueAmt—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value currently attributed to this collateral

    64. 886 UnderlyingEndValueAmt—

      Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the end of the agreement

    65. UnderlyingStipulationsRepeating groupCount tag 887—

      Specific to the <UnderlyingInstrument> (not in <Instrument>)

      UnderlyingStipulations definition & usage →

      1. 887 NoUnderlyingStipsGroup count—
      2. 888 UnderlyingStipTypeString—

        Required if NoUnderlyingStips >0

      3. 889 UnderlyingStipValueString—
    66. 1044 UnderlyingAdjustedQuantityQty—

      Specific to the <UnderlyingInstrument> (not in <Instrument>). For listed derivatives margin management, this is the number of shares adjusted for upcoming corporate action. Used only for securities which are optionable and are between ex-date and settlement date (4 days).

    67. 1045 UnderlyingFXRatefloat—

      Specific to the <UnderlyingInstrument> (not in <Instrument>). Foreign exchange rate used to compute UnderlyingCurrentValue (885) (or market value) from UnderlyingCurrency (318) to Currency (15).

    68. 1046 UnderlyingFXRateCalcchar—

      Specific to the <UnderlyingInstrument> (not in <Instrument>). Specified whether UnderlyingFxRate (1045) should be multiplied or divided to derive UnderlyingCurrentValue (885).

    69. 1038 UnderlyingCapValueAmt—
    70. UndlyInstrumentPartiesRepeating groupCount tag 1058—

      UndlyInstrumentParties definition & usage →

      1. 1058 NoUndlyInstrumentPartiesGroup count—

        Repeating group below should contain unique combinations of InstrumentPartyID, InstrumentPartyIDSource, and InstrumentPartyRole

      2. 1059 UnderlyingInstrumentPartyIDString—

        Used to identify party id related to instrument

      3. 1060 UnderlyingInstrumentPartyIDSourcechar—

        Used to identify source of instrument party id

      4. 1061 UnderlyingInstrumentPartyRoleint—

        Used to identify the role of instrument party id

      5. UndlyInstrumentPtysSubGrpRepeating groupCount tag 1062—

        Repeating group of InstrumentParty sub-identifiers.

        UndlyInstrumentPtysSubGrp definition & usage →

        1. 1062 NoUndlyInstrumentPartySubIDsGroup count—
        2. 1063 UnderlyingInstrumentPartySubIDString—
        3. 1064 UnderlyingInstrumentPartySubIDTypeint—
    71. 1039 UnderlyingSettlMethodString—
    72. 315 UnderlyingPutOrCallint—

      Used to express option right

  9. DerivativeSecurityDefinitionComponent—

    Group block which contains all information for an option family. If provided DerivativeSecurityDefinition qualifies the strikes specified in the Instrument block.

    DerivativeSecurityDefinition definition & usage →

    1. DerivativeInstrumentComponent—

      Optional block which can be used to to summarize common attributes shared across a set of option instruments which belong to the same series.

      DerivativeInstrument definition & usage →

      1. 1214 DerivativeSymbolString—

        Common, "human understood" representation of the security. SecurityID value can be specified if no symbol exists (e.g. non-exchange traded Collective Investment Vehicles) Use "[N/A]" for products which do not have a symbol.

      2. 1215 DerivativeSymbolSfxString—

        Used in Fixed Income with a value of "WI" to indicate "When Issued" for a security to be reissued under an old CUSIP or ISIN or with a value of "CD" to indicate a EUCP with lump-sum interest rather than discount price.

      3. 1216 DerivativeSecurityIDString—

        Takes precedence in identifying security to counterparty over SecurityAltID block. Requires SecurityIDSource if specified.

      4. 1217 DerivativeSecurityIDSourceString—

        Required if SecurityID is specified.

      5. DerivativeSecurityAltIDGrpRepeating groupCount tag 1218—

        DerivativeSecurityAltIDGrp definition & usage →

        1. 1218 NoDerivativeSecurityAltIDGroup count—
        2. 1219 DerivativeSecurityAltIDString—
        3. 1220 DerivativeSecurityAltIDSourceString—
      6. 1246 DerivativeProductint—

        Indicates the type of product the security is associated with (high-level category)

      7. 1228 DerivativeProductComplexString—

        Identifies an entire suite of products for a given market. In Futures this may be "interest rates", "agricultural", "equity indexes", etc

      8. 1243 DerivFlexProductEligibilityIndicatorBoolean—

        Used to indicate if a product or group of product supports the creation of flexible securities

      9. 1247 DerivativeSecurityGroupString—

        An exchange specific name assigned to a group of related securities which may be concurrently affected by market events and actions.

      10. 1248 DerivativeCFICodeString—

        Indicates the type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.

      11. 1249 DerivativeSecurityTypeString—

        It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments. Required for Fixed Income. Refer to Volume 7 - Fixed Income Futures and Options should be specified using the CFICode[461] field instead of SecurityType[167] (Refer to Volume 7 - Recommendations and Guidelines for Futures and Options Markets.)

      12. 1250 DerivativeSecuritySubTypeString—

        Sub-type qualification/identification of the SecurityType (e.g. for SecurityType=MLEG). If specified, SecurityType is required.

      13. 1251 DerivativeMaturityMonthYearMonthYear—

        Specifies the month and year of maturity. Applicable for standardized derivatives which are typically only referenced by month and year (e.g. S and P futures). Note MaturityDate (a full date) can also be specified.

      14. 1252 DerivativeMaturityDateLocalMktDate—

        Specifies date of maturity (a full date). Note that standardized derivatives which are typically only referenced by month and year (e.g. S and P futures).may use MaturityMonthYear and or this field. When using MaturityMonthYear, it is recommended that markets and sell sides report the MaturityDate on all outbound messages as a means of data enrichment.

      15. 1253 DerivativeMaturityTimeTZTimeOnly—
      16. 1254 DerivativeSettleOnOpenFlagString—

        Indicator to determine if Instrument is Settle on Open.

      17. 1255 DerivativeInstrmtAssignmentMethodchar—
      18. 1256 DerivativeSecurityStatusString—

        Gives the current state of the instrument

      19. 1276 DerivativeIssueDateLocalMktDate—

        Date instrument was issued. For Fixed Income IOIs for new issues, specifies the issue date.

      20. 1257 DerivativeInstrRegistryString—

        The location at which records of ownership are maintained for this instrument, and at which ownership changes must be recorded. Can be used in conjunction with ISIN to address ISIN uniqueness issues.

      21. 1258 DerivativeCountryOfIssueCountry—

        ISO Country code of instrument issue (e.g. the country portion typically used in ISIN). Can be used in conjunction with non-ISIN SecurityID (e.g. CUSIP for Municipal Bonds without ISIN) to provide uniqueness.

      22. 1259 DerivativeStateOrProvinceOfIssueString—

        A two-character state or province abbreviation.

      23. 1260 DerivativeLocaleOfIssueString—

        The three-character IATA code for a locale (e.g. airport code for Municipal Bonds).

      24. 1261 DerivativeStrikePricePrice—

        Used for derivatives, such as options and covered warrants

      25. 1262 DerivativeStrikeCurrencyCurrency—

        Used for derivatives

      26. 1263 DerivativeStrikeMultiplierfloat—

        Used for derivatives. Multiplier applied to the strike price for the purpose of calculating the settlement value.

      27. 1264 DerivativeStrikeValuefloat—

        Used for derivatives. The number of shares/units for the financial instrument involved in the option trade.

      28. 1265 DerivativeOptAttributechar—

        Used for derivatives, such as options and covered warrants to indicate a versioning of the contract when required due to corporate actions to the underlying. Should not be used to indicate type of option - use the CFICode[461] for this purpose.

      29. 1266 DerivativeContractMultiplierfloat—

        For Fixed Income, Convertible Bonds, Derivatives, etc. Note: If used, quantities should be expressed in the "nominal" (e.g. contracts vs. shares) amount.

      30. 1438 DerivativeContractMultiplierUnitint—
      31. 1442 DerivativeFlowScheduleTypeint—
      32. 1267 DerivativeMinPriceIncrementfloat—

        Minimum price increment for the instrument. Could also be used to represent tick value.

      33. 1268 DerivativeMinPriceIncrementAmountAmt—

        Minimum price increment amount associated with the MinPriceIncrement [969]. For listed derivatives, the value can be calculated by multiplying MinPriceIncrement by ContractValueFactor [231]

      34. 1269 DerivativeUnitOfMeasureString—
      35. 1270 DerivativeUnitOfMeasureQtyQty—
      36. 1315 DerivativePriceUnitOfMeasureString—
      37. 1316 DerivativePriceUnitOfMeasureQtyQty—
      38. 1317 DerivativeSettlMethodchar—

        Settlement method for a contract. Can be used as an alternative to CFI Code value

      39. 1318 DerivativePriceQuoteMethodString—

        Method for price quotation

      40. 1319 DerivativeValuationMethodString—

        For futures, indicates type of valuation method applied

      41. 1320 DerivativeListMethodint—

        Indicates whether strikes are pre-listed only or can also be defined via user request

      42. 1321 DerivativeCapPricePrice—

        Used to express the ceiling price of a capped call

      43. 1322 DerivativeFloorPricePrice—

        Used to express the floor price of a capped put

      44. 1323 DerivativePutOrCallint—
      45. 1299 DerivativeExerciseStylechar—

        Type of exercise of a derivatives security

      46. 1225 DerivativeOptPayAmountAmt—

        Cash amount indicating the pay out associated with an option. For binary options this is a fixed amount

      47. 1271 DerivativeTimeUnitString—

        Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

      48. 1272 DerivativeSecurityExchangeExchange—

        Can be used to identify the security.

      49. 1273 DerivativePositionLimitint—

        Position Limit for the instrument.

      50. 1274 DerivativeNTPositionLimitint—

        Near-term Position Limit for the instrument.

      51. 1275 DerivativeIssuerString—
      52. 1277 DerivativeEncodedIssuerLenLength—

        Must be set if EncodedIssuer field is specified and must immediately precede it.

      53. 1278 DerivativeEncodedIssuerdata—

        Encoded (non-ASCII characters) representation of the Issuer field in the encoded format specified via the MessageEncoding field.

      54. 1279 DerivativeSecurityDescString—
      55. 1280 DerivativeEncodedSecurityDescLenLength—

        Must be set if EncodedSecurityDesc field is specified and must immediately precede it.

      56. 1281 DerivativeEncodedSecurityDescdata—

        Encoded (non-ASCII characters) representation of the SecurityDesc field in the encoded format specified via the MessageEncoding field.

      57. DerivativeSecurityXMLComponent—

        Embedded XML document describing security.

        DerivativeSecurityXML definition & usage →

        1. 1282 DerivativeSecurityXMLLenLength—

          Must be set if SecurityXML field is specified andd must immediately precede it.

        2. 1283 DerivativeSecurityXMLdata—

          XML Data Stream describing the Security.

        3. 1284 DerivativeSecurityXMLSchemaString—

          XML Schema used to validate the XML used to describe the Security.

      58. 1285 DerivativeContractSettlMonthMonthYear—

        Must be present for MBS or TBA

      59. DerivativeEventsGrpRepeating groupCount tag 1286—

        DerivativeEventsGrp definition & usage →

        1. 1286 NoDerivativeEventsGroup count—
        2. 1287 DerivativeEventTypeint—

          Indicates type of event describing security

        3. 1288 DerivativeEventDateLocalMktDate—
        4. 1289 DerivativeEventTimeUTCTimestamp—

          Specific time of event. To be used in combination with EventDate [1288]

        5. 1290 DerivativeEventPxPrice—
        6. 1291 DerivativeEventTextString—
      60. DerivativeInstrumentPartiesRepeating groupCount tag 1292—

        DerivativeInstrumentParties definition & usage →

        1. 1292 NoDerivativeInstrumentPartiesGroup count—

          Should contain unique combinations of DerivativeInstrumentPartyID, DerivativeInstrumentPartyIDSource, and DerivativeInstrumentPartyRole

        2. 1293 DerivativeInstrumentPartyIDString—

          Used to identify party id related to instrument series

        3. 1294 DerivativeInstrumentPartyIDSourceString—

          Used to identify source of instrument series party id

        4. 1295 DerivativeInstrumentPartyRoleint—

          Used to identify the role of instrument series party id

        5. DerivativeInstrumentPartySubIDsGrpRepeating groupCount tag 1296—

          DerivativeInstrumentPartySubIDsGrp definition & usage →

          1. 1296 NoDerivativeInstrumentPartySubIDsGroup count—
          2. 1297 DerivativeInstrumentPartySubIDString—
          3. 1298 DerivativeInstrumentPartySubIDTypeint—
    2. DerivativeInstrumentAttributeRepeating groupCount tag 1311—

      Additional attribution for the instrument series

      DerivativeInstrumentAttribute definition & usage →

      1. 1311 NoDerivativeInstrAttribGroup count—
      2. 1313 DerivativeInstrAttribTypeint—
      3. 1314 DerivativeInstrAttribValueString—
    3. MarketSegmentGrpRepeating groupCount tag 1310—

      Security trading and listing attributes for the series level

      MarketSegmentGrp definition & usage →

      1. 1310 NoMarketSegmentsGroup count—

        Number of Market Segments on which a security may trade.

      2. 1301 MarketIDExchange—

        Identifies the market which lists and trades the instrument.

      3. 1300 MarketSegmentIDString—

        Identifies the segment of the market to which the specify trading rules and listing rules apply.

      4. SecurityTradingRulesComponent—

        SecurityTradingRules definition & usage →

        1. BaseTradingRulesComponent—

          This block contains the base trading rules

          BaseTradingRules definition & usage →

          1. TickRulesRepeating groupCount tag 1205—

            This block specifies the rules for determining how a security ticks, i.e. the price increments at which it can be quoted and traded, depending on the current price of the security

            TickRules definition & usage →

            1. 1205 NoTickRulesGroup count—

              Number of tick rules. This block specifies the rules for determining how a security ticks, i.e. the price increments at which it can be quoted and traded, depending on the current price of the security.

            2. 1206 StartTickPriceRangePrice—

              Starting price range for specified tick increment

            3. 1207 EndTickPriceRangePrice—

              Ending price range for the specified tick increment

            4. 1208 TickIncrementPrice—

              Tick increment for stated price range. Specifies the valid price increments at which a security can be quoted and traded

            5. 1209 TickRuleTypeint—

              Specifies the type of tick rule which is being described

          2. LotTypeRulesRepeating groupCount tag 1234—

            Specifies the lot types that are valid for trading.

            LotTypeRules definition & usage →

            1. 1234 NoLotTypeRulesGroup count—

              Number of Lot Types

            2. 1093 LotTypechar—

              Defines the lot type assigned to the order. Use as an alternate to RoundLot(561). To be used with MinLotSize(1231). LotType + MinLotSize ( max is next level minus 1)

            3. 1231 MinLotSizeQty—

              Minimum lot size allowed based on lot type specified in LotType(1093)

          3. PriceLimitsComponent—

            Specifies the price limits that are valid for trading.

            PriceLimits definition & usage →

            1. 1306 PriceLimitTypeint—

              Describes the how the price limits are expressed

            2. 1148 LowLimitPricePrice—

              Allowable low limit price for the trading day. A key parameter in validating order price. Used as the lower band for validating order prices. Orders submitted with prices below the lower limit will be rejected

            3. 1149 HighLimitPricePrice—

              Allowable high limit price for the trading day. A key parameter in validating order price. Used as the upper band for validating order prices. Orders submitted with prices above the upper limit will be rejected

            4. 1150 TradingReferencePricePrice—

              Reference price for the current trading price range usually representing the mid price between the HighLimitPrice and LowLimitPrice. The value may be the settlement price or closing price of the prior trading day.

          4. 827 ExpirationCycleint—
          5. 562 MinTradeVolQty—

            The minimum order quantity that can be submitted for an order.

          6. 1140 MaxTradeVolQty—

            The maximum order quantity that can be submitted for a security. For listed derivatives this indicates the minimum quantity necessary for an order or trade to qualify as a block trade

          7. 1143 MaxPriceVariationfloat—

            The maximum price variation of an execution from one event to the next for a given security. Expressed in absolute price terms.

          8. 1144 ImpliedMarketIndicatorint—
          9. 1245 TradingCurrencyCurrency—

            Used when the trading currency can differ from the price currency

          10. 561 RoundLotQty—

            Trading lot size of security

          11. 1377 MultilegModelint—

            Used for multileg security only. Defines whether the security is pre-defined or user-defined. Not that value = 2 (User-defined, Non-Securitized, Multileg) does not apply for Securities.

          12. 1378 MultilegPriceMethodint—

            Used for multileg security only. Defines the method used when applying the multileg price to the legs.

          13. 423 PriceTypeint—

            Defines the default Price Type used for trading.

        2. TradingSessionRulesGrpRepeating groupCount tag 1309—

          This block contains the trading rules specific to a trading session

          TradingSessionRulesGrp definition & usage →

          1. 1309 NoTradingSessionRulesGroup count—

            Allows trading rules to be expressed by trading session

          2. 336 TradingSessionIDString—

            Identifier for the trading session Must be provided if NoTradingSessions > 0 Set to [N/A] if values are not specific to trading session

          3. 625 TradingSessionSubIDString—

            Identifier for the trading session Set to [N/A] if values are not specific to trading session sub id

          4. TradingSessionRulesComponent—

            Contains trading rules specified at the trading session level

            TradingSessionRules definition & usage →

            1. OrdTypeRulesRepeating groupCount tag 1237—

              Specifies the order types that are valid for trading. The scope of the rule is determined by the context in which the component is used. In this case, the scope is trading session.

              OrdTypeRules definition & usage →

              1. 1237 NoOrdTypeRulesGroup count—

                Number of order types

              2. 40 OrdTypechar—

                Indicates order types that are valid for the specified market segment.

            2. TimeInForceRulesRepeating groupCount tag 1239—

              specifies the time in force rules that are valid for trading. The scope of the rule is determined by the context in which the component is used. In this case, the scope is trading session

              TimeInForceRules definition & usage →

              1. 1239 NoTimeInForceRulesGroup count—

                Number of time in force techniques

              2. 59 TimeInForcechar—

                Indicates time in force techniques that are valid for the specified market segment

            3. ExecInstRulesRepeating groupCount tag 1232—

              specifies the execution instructions that are valid for trading. The scope of the rule is determined by the context in which the component is used. In this case, the scope is trading session

              ExecInstRules definition & usage →

              1. 1232 NoExecInstRulesGroup count—

                Number of execution instructions

              2. 1308 ExecInstValuechar—

                Indicates execution instructions that are valid for the specified market segment

            4. MatchRulesRepeating groupCount tag 1235—

              specifies the matching rules that are valid for trading. The scope of the rule is determined by the context in which the component is used. In this case, the scope is trading session

              MatchRules definition & usage →

              1. 1235 NoMatchRulesGroup count—

                Number of match rules

              2. 1142 MatchAlgorithmString—

                The type of algorithm used to match orders in a specific security on an electronic trading platform. Possible values are FIFO, Allocation, Pro-rata, Lead Market Maker, Currency Calendar

              3. 574 MatchTypeString—

                The point in the matching process at which this trade was matched.

            5. MarketDataFeedTypesRepeating groupCount tag 1141—

              specifies the market data feed types that are valid for trading. The scope of the rule is determined by the context in which the component is used. In this case, the scope is trading session

              MarketDataFeedTypes definition & usage →

              1. 1141 NoMDFeedTypesGroup count—

                The number of feed types and corresponding book depths associated with a security

              2. 1022 MDFeedTypeString—

                Describes a class of service for a given data feed

              3. 264 MarketDepthint—

                The depth of book associated with a particular feed type

              4. 1021 MDBookTypeint—

                Describes the type of book for which the feed is intended. Can be used when multiple feeds are provided over the same connection

        3. NestedInstrumentAttributeRepeating groupCount tag 1312—

          NestedInstrumentAttribute definition & usage →

          1. 1312 NoNestedInstrAttribGroup count—
          2. 1210 NestedInstrAttribTypeint—

            Code to represent the type of instrument attribute

          3. 1211 NestedInstrAttribValueString—

            Attribute value appropriate to the NestedInstrAttribType field

      5. StrikeRulesRepeating groupCount tag 1201—

        This block specifies the rules for determining how new strikes should be listed within the stated price range of the underlying instrument.

        StrikeRules definition & usage →

        1. 1201 NoStrikeRulesGroup count—

          Number of strike rule entries. This block specifies the rules for determining how new strikes should be listed within the stated price range of the underlying instrument

        2. 1223 StrikeRuleIDString—

          Allows strike rule to be referenced via an identifier so that rules do not need to be explicitly enumerated

        3. 1202 StartStrikePxRangePrice—

          Starting price for the range to which the StrikeIncrement applies. Price refers to the price of the underlying

        4. 1203 EndStrikePxRangePrice—

          Ending price of the range to which the StrikeIncrement applies. Price refers to the price of the underlying

        5. 1204 StrikeIncrementfloat—

          Value by which strike price should be incremented within the specified price

        6. 1304 StrikeExerciseStyleint—

          Enumeration that represents the exercise style for a class of options Same values as ExerciseStyle

        7. MaturityRulesRepeating groupCount tag 1236—

          Describes the maturity rules for a given set of strikes as defined by StrikeRules

          MaturityRules definition & usage →

          1. 1236 NoMaturityRulesGroup count—

            Number of maturity rule entries. This block specifies the rules for determining how new strikes should be listed within the stated price range of the underlying instrument

          2. 1222 MaturityRuleIDString—

            Allows maturity rule to be referenced via an identifier so that rules do not need to be explicitly enumerated

          3. 1303 MaturityMonthYearFormatint—

            Format used to generate the MMY for each option contract:

          4. 1302 MaturityMonthYearIncrementUnitsint—

            enumeration specifying the increment unit:

          5. 1241 StartMaturityMonthYearMonthYear—

            Starting maturity for the range to which the StrikeIncrement applies. Price refers to the price of the underlying

          6. 1226 EndMaturityMonthYearMonthYear—

            Ending maturity monthy year to which the StrikeIncrement applies. Price refers to the price of the underlying

          7. 1229 MaturityMonthYearIncrementint—

            Value by which maturity month year should be incremented within the specified price range.

  10. 60 TransactTimeUTCTimestamp—
  11. 393 TotNoRelatedSymint—

    Used to indicate the total number of securities being returned for this request. Used in the event that message fragmentation is required.

  12. 893 LastFragmentBoolean—

    Indicates whether this is the last fragment in a sequence of message fragments. Only required where message has been fragmented.

  13. RelSymDerivSecGrpRepeating groupCount tag 146—

    Specifies the number of repeating symbols (instruments) specified

    RelSymDerivSecGrp definition & usage →

    1. 146 NoRelatedSymGroup count—

      Specifies the number of repeating symbols (instruments) specified

    2. InstrumentComponent—

      Instrument definition & usage →

      1. 55 SymbolString—

        Common, "human understood" representation of the security. SecurityID value can be specified if no symbol exists (e.g. non-exchange traded Collective Investment Vehicles) Use "[N/A]" for products which do not have a symbol.

      2. 65 SymbolSfxString—

        Used in Fixed Income with a value of "WI" to indicate "When Issued" for a security to be reissued under an old CUSIP or ISIN or with a value of "CD" to indicate a EUCP with lump-sum interest rather than discount price.

      3. 48 SecurityIDString—

        Takes precedence in identifying security to counterparty over SecurityAltID block. Requires SecurityIDSource if specified.

      4. 22 SecurityIDSourceString—

        Required if SecurityID is specified.

      5. SecAltIDGrpRepeating groupCount tag 454—

        Number of alternate Security Identifiers

        SecAltIDGrp definition & usage →

        1. 454 NoSecurityAltIDGroup count—
        2. 455 SecurityAltIDString—
        3. 456 SecurityAltIDSourceString—
      6. 460 Productint—

        Indicates the type of product the security is associated with (high-level category)

      7. 1227 ProductComplexString—

        Identifies an entire suite of products for a given market. In Futures this may be "interest rates", "agricultural", "equity indexes", etc

      8. 1151 SecurityGroupString—

        An exchange specific name assigned to a group of related securities which may be concurrently affected by market events and actions.

      9. 461 CFICodeString—

        Indicates the type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.

      10. 167 SecurityTypeString—

        It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments. Required for Fixed Income. Refer to Volume 7 - Fixed Income Futures and Options should be specified using the CFICode[461] field instead of SecurityType[167] (Refer to Volume 7 - Recommendations and Guidelines for Futures and Options Markets.)

      11. 762 SecuritySubTypeString—

        Sub-type qualification/identification of the SecurityType (e.g. for SecurityType="MLEG"). If specified, SecurityType is required.

      12. 200 MaturityMonthYearMonthYear—

        Specifies the month and year of maturity. Applicable for standardized derivatives which are typically only referenced by month and year (e.g. S&P futures). Note MaturityDate (a full date) can also be specified.

      13. 541 MaturityDateLocalMktDate—

        Specifies date of maturity (a full date). Note that standardized derivatives which are typically only referenced by month and year (e.g. S&amp;P futures).may use MaturityMonthYear and/or this field. When using MaturityMonthYear, it is recommended that markets and sell sides report the MaturityDate on all outbound messages as a means of data enrichment. For NDFs this represents the fixing date of the contract.

      14. 1079 MaturityTimeTZTimeOnly—

        For NDFs this represents the fixing time of the contract. It is optional to specify the fixing time.

      15. 966 SettleOnOpenFlagString—

        Indicator to determine if Instrument is Settle on Open.

      16. 1049 InstrmtAssignmentMethodchar—
      17. 965 SecurityStatusString—

        Gives the current state of the instrument

      18. 224 CouponPaymentDateLocalMktDate—

        Date interest is to be paid. Used in identifying Corporate Bond issues.

      19. 1449 RestructuringTypeString—
      20. 1450 SeniorityString—
      21. 1451 NotionalPercentageOutstandingPercentage—
      22. 1452 OriginalNotionalPercentageOutstandingPercentage—
      23. 1457 AttachmentPointPercentage—
      24. 1458 DetachmentPointPercentage—
      25. 225 IssueDateLocalMktDate—

        Date instrument was issued. For Fixed Income IOIs for new issues, specifies the issue date.

      26. 239 RepoCollateralSecurityTypeDeprecated FIX.4.4String—
      27. 226 RepurchaseTermDeprecated FIX.4.4int—
      28. 227 RepurchaseRateDeprecated FIX.4.4Percentage—
      29. 228 Factorfloat—

        For Fixed Income: Amortization Factor for deriving Current face from Original face for ABS or MBS securities, note the fraction may be greater than, equal to or less than 1. In TIPS securities this is the Inflation index. Qty * Factor * Price = Gross Trade Amount For Derivatives: Contract Value Factor by which price must be adjusted to determine the true nominal value of one futures/options contract. (Qty * Price) * Factor = Nominal Value

      30. 255 CreditRatingString—
      31. 543 InstrRegistryString—

        The location at which records of ownership are maintained for this instrument, and at which ownership changes must be recorded. Can be used in conjunction with ISIN to address ISIN uniqueness issues.

      32. 470 CountryOfIssueCountry—

        ISO Country code of instrument issue (e.g. the country portion typically used in ISIN). Can be used in conjunction with non-ISIN SecurityID (e.g. CUSIP for Municipal Bonds without ISIN) to provide uniqueness.

      33. 471 StateOrProvinceOfIssueString—

        A two-character state or province abbreviation.

      34. 472 LocaleOfIssueString—

        The three-character IATA code for a locale (e.g. airport code for Municipal Bonds).

      35. 240 RedemptionDateDeprecated FIX.4.4LocalMktDate—
      36. 202 StrikePricePrice—

        Used for derivatives, such as options and covered warrants

      37. 947 StrikeCurrencyCurrency—

        Used for derivatives

      38. 967 StrikeMultiplierfloat—

        Used for derivatives. Multiplier applied to the strike price for the purpose of calculating the settlement value.

      39. 968 StrikeValuefloat—

        Used for derivatives. The number of shares/units for the financial instrument involved in the option trade.

      40. 1478 StrikePriceDeterminationMethodint—
      41. 1479 StrikePriceBoundaryMethodint—
      42. 1480 StrikePriceBoundaryPrecisionPercentage—
      43. 1481 UnderlyingPriceDeterminationMethodint—
      44. 206 OptAttributechar—

        Used for derivatives, such as options and covered warrants to indicate a versioning of the contract when required due to corporate actions to the underlying. Should not be used to indicate type of option - use the CFICode[461] for this purpose.

      45. 231 ContractMultiplierfloat—

        For Fixed Income, Convertible Bonds, Derivatives, etc. Note: If used, quantities should be expressed in the "nominal" (e.g. contracts vs. shares) amount.

      46. 1435 ContractMultiplierUnitint—
      47. 1439 FlowScheduleTypeint—
      48. 969 MinPriceIncrementfloat—

        Minimum price increment for the instrument. Could also be used to represent tick value.

      49. 1146 MinPriceIncrementAmountAmt—

        Minimum price increment amount associated with the MinPriceIncrement [969]. For listed derivatives, the value can be calculated by multiplying MinPriceIncrement by ContractValueFactor [231]

      50. 996 UnitOfMeasureString—

        0

      51. 1147 UnitOfMeasureQtyQty—
      52. 1191 PriceUnitOfMeasureString—
      53. 1192 PriceUnitOfMeasureQtyQty—
      54. 1193 SettlMethodchar—

        Settlement method for a contract. Can be used as an alternative to CFI Code value

      55. 1194 ExerciseStyleint—

        Type of exercise of a derivatives security

      56. 1482 OptPayoutTypeint—
      57. 1195 OptPayoutAmountAmt—

        Cash amount indicating the pay out associated with an option. For binary options this is a fixed amount

      58. 1196 PriceQuoteMethodString—

        Method for price quotation

      59. 1197 ValuationMethodString—

        Indicates type of valuation method used.

      60. 1198 ListMethodint—

        Indicates whether the instruments are pre-listed only or can also be defined via user request

      61. 1199 CapPricePrice—

        Used to express the ceiling price of a capped call

      62. 1200 FloorPricePrice—

        Used to express the floor price of a capped put

      63. 201 PutOrCallint—

        Used to express option right

      64. 1244 FlexibleIndicatorBoolean—

        Used to indicate if a security has been defined as flexible according to "non-standard" means. Analog to CFICode Standard/Non-standard indicator

      65. 1242 FlexProductEligibilityIndicatorBoolean—

        Used to indicate if a product or group of product supports the creation of flexible securities

      66. 997 TimeUnitString—

        Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

      67. 223 CouponRatePercentage—

        For Fixed Income.

      68. 207 SecurityExchangeExchange—

        Can be used to identify the security.

      69. 970 PositionLimitint—

        Position Limit for the instrument.

      70. 971 NTPositionLimitint—

        Near-term Position Limit for the instrument.

      71. 106 IssuerString—
      72. 348 EncodedIssuerLenLength—

        Must be set if EncodedIssuer field is specified and must immediately precede it.

      73. 349 EncodedIssuerdata—

        Encoded (non-ASCII characters) representation of the Issuer field in the encoded format specified via the MessageEncoding field.

      74. 107 SecurityDescString—
      75. 350 EncodedSecurityDescLenLength—

        Must be set if EncodedSecurityDesc field is specified and must immediately precede it.

      76. 351 EncodedSecurityDescdata—

        Encoded (non-ASCII characters) representation of the SecurityDesc field in the encoded format specified via the MessageEncoding field.

      77. SecurityXMLComponent—

        Embedded XML document describing security.

        SecurityXML definition & usage →

        1. 1184 SecurityXMLLenLength—

          Must be set if SecurityXML field is specified and must immediately precede it.

        2. 1185 SecurityXMLXMLData—

          XML payload or content describing the Security information.

        3. 1186 SecurityXMLSchemaString—

          XML Schema used to validate the XML used to describe the Security.

      78. 691 PoolString—

        Identifies MBS / ABS pool

      79. 667 ContractSettlMonthMonthYear—

        Must be present for MBS/TBA

      80. 875 CPProgramint—

        The program under which a commercial paper is issued

      81. 876 CPRegTypeString—

        The registration type of a commercial paper issuance

      82. EvntGrpRepeating groupCount tag 864—

        Number of repeating EventType group entries.

        EvntGrp definition & usage →

        1. 864 NoEventsGroup count—
        2. 865 EventTypeint—
        3. 866 EventDateLocalMktDate—
        4. 1145 EventTimeUTCTimestamp—

          Specific time of event. To be used in combination with EventDate [866]

        5. 867 EventPxPrice—
        6. 868 EventTextString—
      83. 873 DatedDateLocalMktDate—

        If different from IssueDate

      84. 874 InterestAccrualDateLocalMktDate—

        If different from IssueDate and DatedDate

      85. InstrumentPartiesRepeating groupCount tag 1018—

        Used to identify the parties listing a specific instrument

        InstrumentParties definition & usage →

        1. 1018 NoInstrumentPartiesGroup count—

          Repeating group below should contain unique combinations of InstrumentPartyID, InstrumentPartyIDSource, and InstrumentPartyRole

        2. 1019 InstrumentPartyIDString—

          Used to identify party id related to instrument

        3. 1050 InstrumentPartyIDSourcechar—

          Used to identify source of instrument party id

        4. 1051 InstrumentPartyRoleint—

          Used to identify the role of instrument party id

        5. InstrumentPtysSubGrpRepeating groupCount tag 1052—

          Repeating group of InstrumentParty sub-identifiers.

          InstrumentPtysSubGrp definition & usage →

          1. 1052 NoInstrumentPartySubIDsGroup count—
          2. 1053 InstrumentPartySubIDString—
          3. 1054 InstrumentPartySubIDTypeint—
      86. ComplexEventsRepeating groupCount tag 1483—

        ComplexEvents definition & usage →

        1. 1483 NoComplexEventsGroup count—

          Number of complex events

        2. 1484 ComplexEventTypeint—

          Identifies the type of complex event. Required if NoComplexEvents > 0.

        3. 1485 ComplexOptPayoutAmountAmt—
        4. 1486 ComplexEventPricePrice—
        5. 1487 ComplexEventPriceBoundaryMethodint—
        6. 1488 ComplexEventPriceBoundaryPrecisionPercentage—
        7. 1489 ComplexEventPriceTimeTypeint—
        8. 1490 ComplexEventConditionint—

          ComplexEventCondition is conditionally required when there are more than one ComplexEvent occurrences. A chain of ComplexEvents must be linked together through use of the ComplexEventCondition in which the relationship between any two events is described. For any two ComplexEvents the first occurrence will specify the ComplexEventCondition which links it with the second event.

        9. ComplexEventDatesRepeating groupCount tag 1491—

          Used to specify the dates and time ranges when a complex event is in effect.

          ComplexEventDates definition & usage →

          1. 1491 NoComplexEventDatesGroup count—

            Number of complex event date occurrences for a given complex event.

          2. 1492 ComplexEventStartDateUTCTimestamp—

            Required if NoComplexEventDates(1491) > 0.

          3. 1493 ComplexEventEndDateUTCTimestamp—

            Required if NoComplexEventDates(1491) > 0.

          4. ComplexEventTimesRepeating groupCount tag 1494—

            ComplexEventTimes definition & usage →

            1. 1494 NoComplexEventTimesGroup count—
            2. 1495 ComplexEventStartTimeUTCTimeOnly—

              Required if NoComplexEventTimes(1494) > 0.

            3. 1496 ComplexEventEndTimeUTCTimeOnly—

              Required if NoComplexEventTimes(1494) > 0.

    3. SecondaryPriceLimitsComponent—

      Secondary price limit rules

      SecondaryPriceLimits definition & usage →

      1. 1305 SecondaryPriceLimitTypeint—
      2. 1221 SecondaryLowLimitPricePrice—
      3. 1230 SecondaryHighLimitPricePrice—
      4. 1240 SecondaryTradingReferencePricePrice—
    4. 15 CurrencyCurrency—
    5. 292 CorporateActionMultipleCharValue—

      Identifies the type of Corporate Action

    6. InstrumentExtensionComponent—

      InstrumentExtension definition & usage →

      1. 668 DeliveryFormint—

        Identifies the form of delivery.

      2. 869 PctAtRiskPercentage—

        Percent at risk due to lowest possible call.

      3. AttrbGrpRepeating groupCount tag 870—

        Number of repeating InstrAttrib group entries.

        AttrbGrp definition & usage →

        1. 870 NoInstrAttribGroup count—
        2. 871 InstrAttribTypeint—
        3. 872 InstrAttribValueString—
    7. InstrmtLegGrpRepeating groupCount tag 555—

      InstrmtLegGrp definition & usage →

      1. 555 NoLegsGroup count—

        Number of legs

      2. InstrumentLegComponent—

        Must be provided if Number of legs > 0

        InstrumentLeg definition & usage →

        1. 600 LegSymbolString—
        2. 601 LegSymbolSfxString—
        3. 602 LegSecurityIDString—
        4. 603 LegSecurityIDSourceString—
        5. LegSecAltIDGrpRepeating groupCount tag 604—

          LegSecAltIDGrp definition & usage →

          1. 604 NoLegSecurityAltIDGroup count—
          2. 605 LegSecurityAltIDString—
          3. 606 LegSecurityAltIDSourceString—
        6. 607 LegProductint—
        7. 608 LegCFICodeString—
        8. 609 LegSecurityTypeString—
        9. 764 LegSecuritySubTypeString—
        10. 610 LegMaturityMonthYearMonthYear—
        11. 611 LegMaturityDateLocalMktDate—
        12. 1212 LegMaturityTimeTZTimeOnly—
        13. 248 LegCouponPaymentDateLocalMktDate—
        14. 249 LegIssueDateLocalMktDate—
        15. 250 LegRepoCollateralSecurityTypeDeprecated FIX.4.4String—
        16. 251 LegRepurchaseTermDeprecated FIX.4.4int—
        17. 252 LegRepurchaseRateDeprecated FIX.4.4Percentage—
        18. 253 LegFactorfloat—
        19. 257 LegCreditRatingString—
        20. 599 LegInstrRegistryString—
        21. 596 LegCountryOfIssueCountry—
        22. 597 LegStateOrProvinceOfIssueString—
        23. 598 LegLocaleOfIssueString—
        24. 254 LegRedemptionDateDeprecated FIX.4.4LocalMktDate—
        25. 612 LegStrikePricePrice—
        26. 942 LegStrikeCurrencyCurrency—
        27. 613 LegOptAttributechar—
        28. 614 LegContractMultiplierfloat—
        29. 1436 LegContractMultiplierUnitint—
        30. 1440 LegFlowScheduleTypeint—
        31. 999 LegUnitOfMeasureString—
        32. 1224 LegUnitOfMeasureQtyQty—
        33. 1421 LegPriceUnitOfMeasureString—
        34. 1422 LegPriceUnitOfMeasureQtyQty—
        35. 1001 LegTimeUnitString—

          Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

        36. 1420 LegExerciseStyleint—
        37. 615 LegCouponRatePercentage—
        38. 616 LegSecurityExchangeExchange—
        39. 617 LegIssuerString—
        40. 618 EncodedLegIssuerLenLength—
        41. 619 EncodedLegIssuerdata—
        42. 620 LegSecurityDescString—
        43. 621 EncodedLegSecurityDescLenLength—
        44. 622 EncodedLegSecurityDescdata—
        45. 623 LegRatioQtyfloat—

          Specific to the <InstrumentLeg> (not in <Instrument>)

        46. 624 LegSidechar—

          Specific to the <InstrumentLeg> (not in <Instrument>)

        47. 556 LegCurrencyCurrency—

          Specific to the <InstrumentLeg> (not in <Instrument>)

        48. 740 LegPoolString—

          Identifies MBS / ABS pool

        49. 739 LegDatedDateLocalMktDate—
        50. 955 LegContractSettlMonthMonthYear—
        51. 956 LegInterestAccrualDateLocalMktDate—
        52. 1358 LegPutOrCallint—

          Used to express option right

        53. 1017 LegOptionRatiofloat—

          LegOptionRatio is provided on covering leg to create a delta neutral spread. In Listed Derivatives, the delta of the leg is multiplied by LegOptionRatio and OrderQty to determine the covering quantity.

        54. 566 LegPricePrice—

          Used to specify an anchor price for a leg as part of the definition or creation of the strategy - not used for execution price.

    8. 1504 RelSymTransactTimeUTCTimestamp—
    9. 58 TextString—

      Comment, instructions, or other identifying information.

    10. 354 EncodedTextLenLength—

      Must be set if EncodedText field is specified and must immediately precede it.

    11. 355 EncodedTextdata—

      Encoded (non-ASCII characters) representation of the Text field in the encoded format specified via the MessageEncoding field.

  14. StandardTrailerComponentRequired

    StandardTrailer definition & usage →

    1. 93 SignatureLengthDeprecated FIXT.1.1Length—

      Required when trailer contains signature. Note: Not to be included within SecureData field

    2. 89 SignatureDeprecated FIXT.1.1data—

      Note: Not to be included within SecureData field

    3. 10 CheckSumStringRequired here

      (Always unencrypted, always last field in message)